News

Ideal for daily checks of torque screwdrivers.

The DLC-G Series torque screwdriver checker is now on the market.

Once it reaches the set torque, it slips to prevent overtorque (over-tightening).

The product introduction video for the QSPCA Series slip type preset torque wrench is now available.

Click here for product information and to view the video.

Our Online Parts Search System has been updated.

Use the system also for ordering parts required to repair Tohnichi torque devices such as a torque screwdriver, torque wrench, torque gauge and torque meter.

The upgrade includes

・ New release:

　CES series of small capacity interchangeable head digital torque wrenches with angle measurement function

　Small capacity digital torque wrench tester DOTE10N4

・ For repairs, etc.:

　TW2, A/AC, DOTE4, ATG-S/BTG-S, CTB2, DB-S/CDB-S, AURLS, AMLD/AMRD, CL5, QLE2, DECA2, PQL/PCL, MPQL, DAC, HA/HAC, MF

* For details, please refer to the updated information on the Online Part Search System.

* The Online Part Search System is also available from the Product Information page.

* Note: To view products using the system, you must be registered as a member.

Fastener Europe Magazine features a product manufactured by Tohnichi.

The product featured is Tohnichi’s data management system TWMS, used when tightening the wheel nuts of large vehicles.

* At the present time TWMS is supplied only in Japan.

[Optional Equipment] TW2 Series (English)

Tohnichi has released an English-language version of the free iOS data management software DtRcv (Data Receiver).

It allows easy data management on iOS devices such as iPad.

Click here to download it at no charge.

[Device use potential] * Devices supported by Bluetooth Low Energy (GATT Profile).

・ CES series (must use the M-CES-BT Bluetooth Expansion Module).

* The DtRcv iOS version uses only a Bluetooth® connection, so cannot be used with a cable connection.

• Bluetooth® is registered trademark of Bluetooth SIG, Inc.

• iOS is the operating system trade name of Apple Inc.

• iPad is a trademark of Apple Inc.

Featuring a small torque design, about 40% lighter in weight than the older model, and more compact as well, with overall length reduced by 6–7 cm.

Another improvement: The Click! sound is easier to hear when the set torque value is reached.

Tohnichi has placed the semi-automatic Airtork A4/ALS4 series on the market.

[Model details]

・ A10N4, ALS10N4, A25N4, ALS25N4

For more information, please see the Tohnichi product page.

Tohnichi released its new digital torque meter TME3-G on April 22, 2024.

[Features]

・ Ideal for measuring cap opening torque. Can detect both primary and secondary peak opening torque.

・ Minimum chuck diameter of 7 mm possible. Pole anchors use a co-rotation prevention mechanism to grasp your work firmly.

・ Can measure torque waveforms and be used for changing various settings. * Uses application software for TME3 (APS for TME3), which can be downloaded at no charge. ※ Can be used only with a wired connection to a computer.

・ Accuracy ±0.3% FS + 1 digit. With CE marking.

Click here for more TME3-G information.

Due to the launch of the TME3-G digital torque meter (scheduled for April 22, 2024), we will stop receiving orders for the long-admired TME2 digital torque meter and some products in the TM torque meter line on April 18, 2024.

Models to be discontinued are listed below.

We request your understanding.

Models to be discontinued:

・ All types in the TME2 series

・ All types in the 2TM series

・ All types in the 3TM series

*For more details regarding the affected models, please refer to product information for the TME2 series and TM series.

*Tohnichi will continue to sell calibration kits 2TMTCL and 3TMTCL.

Tohnichi has ended manufacturing and sales of the long-admired TCR rotary-type torque sensor, due to a number of factors.

We apologize for this sudden change.

We thank our customers for their use of Tohnichi products over the years.

Sale end date: March 22, 2024.

Sales have ended for the following products: TCR18N, TCR180N, TCR700N, and TCR1800N

Tohnichi looks forward to continuing to serve customers worldwide and strives to ensure their satisfaction.

Volume 10 of the Tohnichi Torque Handbook (in English), which contains the latest technical and product information to enhance torque control and tightening reliability, is now available.

Click here to request a copy.

We have recently discovered an issue with the PC software “Pokayoke Tool Setting Software” used to set up wireless torque wrenches.

We would like to inform you as follows in order to update the software of the affected products.

We sincerely apologize in advance for any inconvenience.

We appreciate your understanding and cooperation regarding this issue.

[Bug report]

When using Pokayoke Tool Setting Software

・Wireless torque wrench CSPFHW Series

・Wireless torque wrenches equipped with the “T-FH” transmitter

will not communicate with “R-CM” Receivers when the wireless communication format is set to “R-CM(M-FH).

As this software is used when setting up connections, there will be no impact if the connection between the torque wrench and the receiver has already been established.

[Affected products]

Affected Software: Pokayoke Tool Setting Software

Affected software versions:　Ver.1.0.0.4　Ver.1.0.0.14　Ver.1.0.0.27

(The software version is displayed on the title bar after starting the software.)

[Resolution]

We have updated the software, fixed the bugs, and uploaded it to our website. (Revised software version: Ver.1.0.0.29)

We apologize for the inconvenience, but please follow the steps below to update your software.

[Installation procedure]

If you already have the Pokayoke Tool Setting Software installed, please uninstall it, then download and install the latest version of the software.

*User data will not be deleted after uninstallation.

Please download the latest version of the software from the URL below.

*Login is required to download.

*Pokayoke Tool Setting Software is a common software for various products.

・CSPFHW

・FHM/FH

・R-CM

We sincerely apologize for the inconvenience caused by this issue.

We look forward to your continued support.

Tohnichi Manufacturing has released its 2024 Business Calendar.

Click here to view our business calendar.

The SCL-MH series of European type interchangeable head adjustable torque wrenches with knurled grip (8 models) and the SCSP-MH series of interchangeable head preset torque wrenches (8 models) are now available.

The CES series of compact interchangeable head digital torque wrenches is equipped to detect tightening abnormalities.

Monitors torque and angle to detect tightening abnormalities such as scuffing, missing parts, missed tightening (or double tightening), and O-ring nibbling, to prevent the delivery of defective products to clients.

The optional Bluetooth Expansion Module (M-CES-BT) for the CES series now conforms to the technical standards of more countries and can be used in more of them (see below).

As of July 2023, conforms to the technical standards of Japan, the USA, Canada, the EU, China, Thailand, India, and Singapore. Can also be used in Mexico and Vietnam.

See here for more product information on the CES series.

To learn more about the Bluetooth Expansion Module (M-CES-BT), see here.

Designed for tightening work on fragile apparatus, such as plastic parts and sensors, as well as for the assembly and maintenance of semiconductor manufacturing equipment, inspection instruments and peripheral devices, the CES/CES-G series of compact digital torque wrenches have a measurement torque range of 0.5 to 10 N･m. Tohnichi developed both models in the series and is releasing them on the market beginning on Wednesday, June 21, 2023.

Product Outline

・ Offers angle measurement functionality. Like the CEM3-G-BTAmodel, torque and angle monitoring permit the detection of defective tightening.

・ The optional Bluetooth Expansion Module is available for wireless data management.

・ CES5Nx6D can be used with the 6D series of compact interchangeable heads, which were launched in January 2023. Designed to improve workability during tightening and inspection tasks in confined spaces.

For more product information, please see here.

Our Online Parts Search System has been updated.

Use the system also for ordering parts required to repair Tohnichi torque devices such as a torque screwdriver, torque wrench, torque gauge and torque meter.

The upgrade includes

・Newly added

　Open-end interchangeable head pre-lock marking torque wrench "MPCL series"

　Battery type torque screwdriver with Bluetooth "PTA-BT series"

・Modifications: CDB5-S, DB5, T23N2-S, TME2, TM-S, A3, AC3, AP2, AS, ASH, ASL, DAC, DAC3, HA/HAC, etc.

* For details, please refer to the updated information on the Online Part Search System.

* The Online Part Search System is also available from the Product Information page.

* Note: To view products using the system, you must be registered as a member.

The “QSPCA series” rotary slip-type preset torque wrench, which prevents overtorque by idling with a Click! when the set torque is reached, has sold more than 10,000 units.

We launched the QSPCA series in January 2011, and we also added QSPCAMS/QSPCALS or wire(d) pokayoke (error-proofing) preventing human tightening errors through tightening count control, and QSPCAFHP/QSPCAFHLSM for wireless pokayoke (error-proofing).

We have released the “DOTCL10N” calibration kit for the digital torque wrench tester “DOTE10N4-G”.

For example:

　Compact Torque Wrench CSP6D series

　　 >Digital Torque Wrench Tester DOTE10N4-G

　　　>Calibration Kit DOTCL10N

and Traceability are established.

Built-in torque sensor. Customers who purchase the "PTA-G-BT series" battery type electric torque screwdriver that can output tightening data externally via Bluetooth will receive the tightening control software for the PTA-G-BT used in the introduction video from 2:14 to 3:16.

[Software Overview]

・Switchable between English/Japanese.

・After tightening, the results are sent from the tool to the PC.

・Up to nine different tightening conditions can be registered for one work (up to two types of work).

・The software displays a picture of the customer's work, allowing the user to visually check the work order, etc.

・Up to two types of tools can also be registered, so that models with different torque ranges or tools with different sockets are also supported.

・Imported tightening data can be exported in CSV format.

*This software cannot be downloaded.

Tohnichi Manufacturing developed the CSP2NX6D and CSP5NX6D compact interchangeable-head preset torque wrenches for unobstructed tightening in confined spaces, and released them on the market on January 23, 2023.

For more product information, check out the details here.

■ Main specs: * Accuracy, both models: ±3%

CSP2NX6D: Torque range 0.4 ~ 2 N·m

CSP5NX6D: Torque range 1 ~ 5 N·m

■ Features:

· Slimmer body. Designed for unobstructed tightening in confined spaces.

(Body width reduced from 19 mm to 12 mm, thickness from 9.2 mm to 7.3 mm.)

　This newly developed connector is used together with dedicated φ6 compact interchangeable heads.

· Distinct click sensation useful in preventing overtightening.

　Newly developed to improve structural design. When set torque is reached, the click clearly indicates that it has been tightened to completion.

■ Other facts

· This newly developed connector was released simultaneously with the dedicated φ6 compact interchangeable heads in the QH6D and SH6D series (12 types each).

· This product is preset. The simultaneously released digital torque wrench tester DOTE10N4-G is required for “Click!” torque setting functionality and calibration.

Tohnichi Manufacturing developed the QH6D and SH6D series of interchangeable heads (12 types each) for compact interchangeable head torque wrenches, and released them on the market on January 23, 2023.

For more information on our interchangeable head products, check out the details here.

[Features]

Product name: Ratchet Head Model: QH6D

Product name: Open End Head Model: SH6D series　

　　　　* Open End Head; width across flats: 5.5 to 19 (12 types)

[Features]

· Can be used connected to the CSP2NX6D and CSP5NX6D compact interchangeable-head preset torque wrenches, which were newly released at the same time.

· Developed for tightening in confined spaces. One step smaller than the previous minimum size models in the QH8D and SH8D series.

· QH6D uses 48-tooth ratchet. Easier workability in confined spaces where the swing arc is narrow.

Tohnichi Manufacturing developed the small capacity digital torque wrench tester DOTE10N4-G and released it on the market on January 23, 2023.

Go here for product information.

■ DOTE10N4-G major specs

Measuring range: 0.2 ~ 10 N·m

1 digit (1 kN): 0.001 N·m

Accuracy: ±1% + digit

■ Features:

1) Can be used for calibration and torque setting of the simultaneously sold CSP2NX6D or CSP5NX6D compact interchangeable-head preset torque wrenches.

2) This tester alone can be used for Tohnichi’s click-type torque wrenches gauged for measurements 10 N･m and below.

3) Setup location area can be as small as a sheet of A4 paper (similar to 8½ x 11 inch paper).

4) Newly developed loading device for DOTE10N4-G rotations for each side, for sensitive calibration of small capacity torque devices.

■ Other facts

The DOTCL10N calibration kit for DOTE10N4-G is also newly developed.

Capable of managing both wired and wireless (Bluetooth®) tightening data.

Use Excel® on your computer to manage data received via DtRcv (Data Receiver).

DtRcv has been added to [Software] on the lower part of the Bluetooth-enabled product page.

Compatible types:

CEM3-G-BT, CEM3-G-BTA

The following also can be used: STC2-G (-BT), ST3-G (-BT) , and PTA-G-BT.

Use for communication confirmation and easy data management.

Product versions TDMS-E/ and TDMSHT-E are also available.

Marking torque wrenches automatically leave a mark on the heads of bolts and make a clicking sound at the same time when the set torque is reached. The mark is evidence that tightening achieved the set torque.

This prevents technicians from erroneously marking bolts without giving them a final tightening, and helps explain why many companies now use Tohnichi’s marking tools.

MPCL and MCSP torque wrenches mark nuts and bolts during tightening operations. Illustrations on their product pages have been added to demonstrate marking hex bolts.

If the socket lengths of MPQL or MQSP are too long for tightening a hex bolt, you may be able to use the MPCL or MCSP instead.

Tohnichi Manufacturing has released its 2023 Business Calendar.

Click here to see the Business Calendar.

Marking torque wrenches automatically leave a mark when the set torque is reached with a “Click!” sound as evidence of tightening to the specified torque.

Tohnichi Manufacturing has released easy-to-understand operating animations that explain how markings are made regarding the marking mechanism of marking torque wrenches on the following five product pages.

・Pre-lock/Preset marking torque wrench for hex bolts MPQL/MQL

・Preset marking torque wrench for hex boltsMQSP

・Preset marking torque wrench for hex socket head boltsCMQSP

・Open-end interchangeable head preset marking torque wrench MCSP

・Open-end interchangeable head pre-lock marking torque wrench MPCL

Its resolution is 50 times greater than that of the current model (the TT2000).

You can now measure the axial force of bolts with a short tightening length (bolts that are difficult to elongate).

Tohnichi has newly released software for its TT3000 Ultrasonic Tightening Tester (ultrasonic bolt tension meter).

【Software Overview】

・ Bidirectional Communication (USB/Ethernet) between the TT3000 and a computer, allowing the user to manage data on their computer.

・ Easy data migration from the current TT2000 model.

　To transfer data, simply import the TT2000 measurement condition setting into the TT3000.

　(Only compatible data are transferred.)

Other improvements have also been made.

For further details, refer to the User’s Manual included in the software.

Our Online Parts Search System has been updated.

Use the system also for ordering parts required to repair Tohnichi torque devices such as a torque screwdriver, torque wrench, torque gauge and torque meter.

* Note: To view products using the system, you must be registered as a member.

Tohnichi Manufacturing has released the English version of the Product Information for 2022.

Click here to download it.

On January 21, 2022, Tohnichi launched the TT3000, the advanced successor to the TT2000 ultrasonic tightening tester (ultrasonic bolt tension meter).

[Applications]

• Bolt axial tension testing. • Measurement of time-dependent changes (loosening).

• Determination of optimum tightening torque during trial manufacturing and development.

[Features]

• High resolution. Time resolution is 0.1ns, which is 50 times greater than the TT2000.

• Full touch panel. Icons, menu bar, and caption displays enable intuitive operation.

And more

Click here for more details.

ISO 6789 is the international standard that defines requirements and testing methods for hand torque tools.

Starting January 2022, Tohnichi Manufacturing is shipping products that are compliant with ISO 6789:2017.

[Features]

1) As a general rule, products manufactured in and after January 2022 come with a Calibration Certificate that states compliance with ISO 6789:2017. Products not in compliance with ISO 6789:2017 will come with the same Calibration Certificates as before.

2) The Calibration Certificates will be different.

3) Torque ranges and models will change for some products.

Click here for more information.

◆ Initiatives for ISO 6789:2017 (PDF) ◆

　　*At end of Technical data / Above How to Use*

Tohnichi Manufacturing has released its 2022 Business Calendar.

Click here to see the Business Calendar.

Use TPC/TPC2 to convert Tohnichi output format to a wide variety of protocols in your network.

You can select from four protocols, including Atlas Copco Open Protocol.

TPC：ACOP serial / ACOP socket / STANLEY / CUSTOM

TPC2：ACOP serial / ACOP socket / ToolsNet / CUSTOM

Go here for more information on TPC/TPC2 products.

The series has two models: just pull the trigger for fully automatic tightening, from 2 to 10 N･m.

The built-in torque sensor and angle sensor can detect double tightening and other tightening abnormalities.

There is no need for a dedicated controller -- the tightening torque upper and lower limits and angle can be set using the key-in function on the body, or through Bluetooth® connectivity.

Battery-operated fully automatic torque driver PTA-BT/PTA-G-BT series models are now available for purchase.

The Tohnichi-developed MPCL series of marking type pre-lock torque wrenches (with torque scale) is designed to prevent missed tightening. Wrenches will automatically mark the corner of nuts (or bolts) when the set tightening torque is reached. The series went on sale on May 21, 2021.

There are three models in the series lineup, offering a range of tightening torque from 10 to 140 N･m, with ±3% precision. For bolt diameters ranging from around M8 to M16.

Go here for more information on the MPCL series.

The following tools and devices now conform to ICASA wireless standards of South Africa and can be used there: FHM wireless error-proofing torque wrench; QSPCAFHM rotary slip wireless error-proofing torque wrench; CSPFHW error-proofing torque wrench with double tightening detection capability; R-CM wireless receiver with interchangeable modules and the M-FH receiver module; SB-FH2 setting controller.

DECA450N to DECA3000N models in the DECA series have been upgraded to the DECA450N2 to DECA3000N2 models in the DECA2 series.

[Model upgrade details]

1) DECA2 series models are up to 30% lighter and have an overall length that is up to 22% shorter than their DECA predecessors.

2) DECA2 series models have a ratchet mechanism as a new added feature, to improve workability in confined spaces.

For more product information on the DECA2/DECA series, click here.

ExRcv (Excel Receiver), a wired data input tool facilitating Excel® data management, has been upgraded to DtRcv (Data Receiver).

[Main improvements]

1) Windows 10 compatible

2) Simply establish serial communication to retrieve data.

3) Facilitates selection of data stored in Excel and CSV formats.

Software for the following supported products can be downloaded from [Download] > [Software] at the bottom of the Supported Products webpage.

[Supported Products]

CEM3/CEM3-G , CTB2/CTB2-G , CPT/CPT-G , DOTE4/DOTE4-G , DOTE4-MD2/DOTE4-G-MD2 , LC3/LC3-G , ST3/ST3-G , STC2/STC2-G , TDT3/TDT3-G , CD5 , TME2 , ATGE/ATGE-G , BTGE/BTGE-G , DOTE3/DOTE3-G

Pokayoke (error-proofing) device configuration software updated.

When a PC with “Pokayoke (error-proofing) device configuration software” installed is connected with an SB-FH2 via RS-232C, the PC can configure FHM, R-CM, FD/FDD, CSPFHW, and other products wirelessly.

*The “Pokayoke (error-proofing) device configuration software” can be downloaded free of charge from [Software] at the bottom of the SB-FH2 page.

Business Calendar through June 2021 added.

Click here to see the Business Calendar.

Tohnichi is now accepting orders for AFC-20G2 Axial Tension Calibration Devices for TT Series Ultrasonic Testers.

For more product information, check out the details here.

FHM wireless error-proofing torque wrenches, QSPFHM rotary slip wireless error-proofing torque wrenches, R-CM wireless receivers with interchangeable modules and M-FH receiver modules, and the SB-FH2 setting controller are now compliant with Brazilian wireless technology standards (ANATEL) and can be used in Brazil.

A clicking sound is heard when set torque is achieved and, at the same time, tightening torque data is transmitted wirelessly from the torque wrench.

FD/FDD and FDD-AD models allow users to confirm tightening pass/fail judgments with an LED on the wrench handle, and are now compliant with and usable under Singaporean wireless technology standards (IMDA).

The FDD model is equipped with double tightening detection, while the FDD-AD improves tightening reliability by performing advanced pass/fail judgment based on angle and torque.

Wireless error proofing torque wrenches FHM and FHW, R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 are now compliant with and usable under Singaporean wireless technology standards (IMDA).

The FHW (CSPFHW) is equipped for double tightening detection.

R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD are now compliant with and usable under Taiwanese wireless technology standards (NCC).

TDMS/TDMSHT tightening data management system version upgraded to Ver. 3.00.

Ver. 3.00 is now compatible with two additional torque devices, with the Bluetooth-equipped ST3-BT torque measuring equipment and the CEM3-BTA Bluetooth-equipped digital torque wrench with angle measurement functions.

TDMS/TDMSHT performance record includes the following applications:

• It offers labor-saving data entry and prevents input mistakes.

• It can be used for managing tightening and inspection data.

• It can be used for re-tightening inspections.

• It can be used to manage torque data in tightening work.

• It can be used to reference value management and for early anomaly detection.

Pokayoke (error-proofing) device configuration software updated.

When a PC with “Pokayoke (error-proofing) device configuration software” installed is connected with an SB-FH2 via RS-232C, the PC can configure FHM, R-CM, FD/FDD, CSPFHW, and other products wirelessly.

*The “Pokayoke (error-proofing) device configuration software” can be downloaded free of charge from [Software] at the bottom of the SB-FH2 page.

The wireless error proofing torque wrenches FHM and FHW, R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to Indonesia’s wireless technical standards (SDPPI), and can now be used there as well.

The FHW (CSPFHW) is equipped for double tightening detection.

Wireless error proofing torque wrenches FHM and FHW, R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to India’s wireless technical standards (WPC), and can now be used there.

The FHW (CSPFHW) is equipped for double tightening detection.

Wireless error proofing torque wrench FHM, R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to Thailand’s wireless technical standards (NTC), and can now be used there.

Wireless error proofing torque wrenches FHM and FHW, R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to South Korea’s wireless technical standards (KC), and can now be used there.

The FHW (CSPFHW) is equipped for double tightening detection.

R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to EU wireless technical standards (CE), and can now be used there.

Wireless error proofing torque wrenches FHM and FHW, and setting controller SB-FH2 conform to Taiwan’s wireless technical standards (NCC), and can now be used there.

The FHW (CSPFHW) is equipped for double tightening detection.

R-CM wireless receiver with interchangeable modules and receiver modules M-FH/M-FD, and setting controller SB-FH2 conform to wireless technical standards in the U.S. and Canada, and can now be used there.

The wireless Pokayoke (error proofing) torque screwdriver RTDFH/RNTDFH, which manages tightening times to prevent missed tightening, and the compact wireless Pokayoke torque wrench FHP conform to technical standards in India and can now be used there.

Tohnichi recently launched the FHM/FH transmitter for wireless Pokayoke (error proofing) torque wrenches.

• The transmitter is the downwardly compatible successor to the FH256MC series of wireless Pokayoke torque wrenches, which set the global standard after arriving on the market in 2008.

• The new series controls the number of tightening operations to prevent missed tightening. The FHM uses New Telecommunication Mode to extend data transfer distance.

• The very welcome battery voltage monitor helps prevent shutdown.

• Battery life is 25% longer than that for the older T-FH256MC transmitter.

■ For more product information, check out the details here.

Tohnichi recently launched the R-CM Wireless Receiver with Interchangeable Modules.

• The R-CM is the downwardly compatible successor to the wireless Pokayoke (error proofing) R-FH256 receiver, which has been a success ever since it arrived on the market in 2008.

• It functions with three types of interchangeable wireless modules, offering low-cost solutions for work using Pokayoke torque wrenches, Pokayoke torque screwdrivers, and FD/FDD data transfer torque wrenches.

• New Telecommunication Mode compatible.

■ For more product information, check out the details here.

Tohnichi’s Bluetooth® equipped torque devices can now be used in Malaysia.

[Products in scope]

1) CEM3-BT/CEM3-G-BT

2) CEM3-BTA/CEM3-G-BTA

3) ST3(-BT) / ST3-G(-BT)

4) STC2（-BT)/STC2-G（-BT)

5) HA/HAC

Two of Tohnichi’s Bluetooth-equipped digital torque wrench series conform to wireless telecommunication standards in Indonesia.

・CEM3-BT/CEM3-G-BT

・CEM3-BTA/CEM3-G-BTA

The Tohnichi online parts search system makes it easy to look for parts that are needed when repairing torque wrenches, torque screwdrivers, and other tools. Information contained in the search system has recently been upgraded.

The upgrade includes

• The parts list for the ALS100N3 and ALS180N3.

• We have updated the parts list for the heads with protective rubber cover for the DB420N, CDB420NX22D-S, and DBE models.

Access the Tohnichi online parts search system here.

* Please note that membership is required to access the Tohnichi online parts search system.