PRODUCTS

English

Torque Screwdriver Tester

TDT3/TDT3-G

Digital torque screwdriver tester

Calibration

Digital

Manual Rotary

Direct Reading

Loading Device

TDT60CN3

TDT600CN3+LTA

TDT600CN3+TDTLA3　※Example of use of the optional TDTLA when calibrating small range torque wrenches

Digital type torque screwdriver tester eliminates visual reading errors.
The loading device controls fluctuations in measuring conditions caused by torque screwdriver inclination.
The measuring range is wide and applicable for various types of torque drivers.
Comes with Pass/Fail judgment feature. Judgment results are shown in three colors (white/red/blue), for easy result recognition.
Power source: AC 100V–240V.
We have experience manufacturing products with American units of measurement (lbf, in, etc.) for Japan’s aircraft manufacturing industry and for export to the U.S., and products with metric units of measurement (kgf, cm, etc.) for export to other parts of the world.
DtRcv (Data Receiver) is a wired data input tool facilitating Excel® data management, and can be downloaded without charge. * ExRcv (Excel Receiver) was upgraded to DtRcv (Data Receiver) in March 2021. * Excel® is a registered trademark of Microsoft Corporation.

Accuracy ± 1%+1digit
MODEL					TDT60CN3-G		TDT600CN3-G
TORQUE RANGE ［cN・m］		MIN.～MAX.			2～60		20～600
		1 DIGIT			0.005※		0.05※
TORQUE RANGE ［kgf・cm］		MIN.～MAX.			0.2～6		2～60
		1 DIGIT			0.0005※		0.005※
TORQUE RANGE ［ozf・in］		MIN.～MAX.			3～80		30～800
		1 DIGIT			0.005※		0.05※
TORQUE RANGE ［lbf・in］		MIN.～MAX.			0.2～5		2～50
		1 DIGIT			0.0005※		0.005※
INLET DRIVE［mm］					6.35 HEX (Male) with a groove (minus 0.7mm)
WEIGHT [kg]					11

DATA MEMORY				1000 data (99 data in M99 mode)
STATISTICAL PROCESSING				Number of samples/max./min./mean value
UPPER/LOWER LIMIT VALUE SETTING				10 settings
MEASURING MODE				PEAK/RUN
ZERO ADJUSTMENT				Automatic
DATA OUTPUT				RS232C（compliant), USB（B type）serial communication
RESET				Manual/Auto (0.1～5.0 sec. selectable)
OPERATING TEMPERATURE RANGE［℃］				0～40 (no condensation)
POWER AC［V］				100～240 ±10% 50/60Hz ※12V（Battery pack BP-100-3 (Optional Accessory）in use)

MODEL				STA（For LTD/RTD） LTA（For FTD/STC）				TDTLA3（For small torque wrench）
APPLICABLE GRIP DIAMETER φD［mm］				7～50				－
APPLICABLE GRIP HEIGHT ［mm］	STANDARD BIT		H1	105		211
	BIT S		H2	80		286
	BIT Ｌ		H3	－		154
INLET DRIVE □a［mm]				－				6.35
MEASURABLE EFFECTIVE LENGTHＬ［mm]				－				90～220

In M99 mode (TDT2 compatible mode), 1 digit is 0.01 on the TDT60CN3, and 0.1 on the TDT600CN3.
STA is a loading device for torque screwdrivers (LTD, RTD, etc.).
LTA is a loading device for direct reading torque screwdrivers (FTD, STC, etc.).
TDTLA3 TDT60CN3 measures 2 to 60 cN･m torque wrenches, while the TDT600CN3 measures 20 to 600 cN･m torque wrenches.
No. 485 loading adapter for TDT/TDT2 is required to attach TDTLA3 to TDT/TDT2.
No. 486 loading adapter for TDT/TDT2 is required to attach STA or LTA to TDT/TDT2.