PRODUCTS
English
Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10
GLOBAL HOMEHOME > Products > Optional Equipment > Torque Attachment > Option
Option
AC Adapter 00T44927A
AC Adapter BA-4
AC Adapter BA-6
AC Adapter BA-7
AC Adapter BA-8R
AC adaptor for the R-CM Wireless Receiver with Interchangeable Modules, or for the Bluetooth® equipped R-BT receiver.
AC Adapter BA-8W
AC adapter for TPC/TPC2.
AC Adapter US300520
Option for ATG･ATGE/BTGE: Table attachment
Use clamps Φ10 to 58 and ATGE/BTGE like a torque meter.
Option for ATG･ATGE/BTGE: Calibration adapter
An adapter used when mounted on ATGTCL/BTGTCL calibration kit.
Option for ATG･ATGE/BTGE: Resin chuck
This resin chuck helps prevent scratches during tasks requiring delicate handling.
ATG･ATGE/BTGE option: Measuring stand
ATGE/Stand to secure BTGE.
Protective cover BL-PCV for BL/BLE/BLA devices
Install a torque wrench T-BL/T-BLE/T-BLA transmitter, then use the cover to prevent scratches on your work and to reduce shocks to the transmitter.
Bluetooth Expansion Module
Bluetooth Module for compact the Digital Torque Wrench CES/CES-G.
REMARK
Transmission distance depends on such factors as radio-wave environment and connected device performance.
As of July 2023, M-CES-BT conforms to the technical standards of Japan, the USA, Canada, the EU, China, Thailand, India, and Singapore. Can also be used in Mexico and Vietnam.
FD/FDD related devices Protection cover FD-PCV
A cover, which is fitted on the FD/FDD transmitter of the torque wrench, prevents flaws and alleviates impact on a transmitter.
Optional Equipment for FH: Magnetic antenna holder FH-MHD
Use this to stabilize the position of an antenna from R-FH256 receiver.
FH optional devices: Antenna extension cable FH-COD
Extension cable extends antenna from R-FH256 receiver to improve communication conditions.
Optional Equipment for FH: FH-PCV protective cover
Install a torque wrench FH transmitter, then use the cover to prevent task-related scratches and reduce shocks to the transmitter.
Optional Equipment for FH: FHSLS-PCV protective cover
Install a torque wrench FH transmitter, then use the cover to prevent task-related scratches and reduce shocks to the transmitter.
Hexagon head adapter
A hex adapter able to be used with a selection of commonly used hex sizes.
CONNECTOR FOR LS
Extension bar for ST3
Note: ST extension bar (option) is designed with the same length as ST so that torque checking of a nut runner can be done easily.
Option for TDT: Loading adapter for TDT/TDT2
TDT option: Hex adapter
Optional ultrasonic sensor for TT2000/TT3000
Option for TT2000: Portable battery
Option for TT2000: Axial tension calibrator
Curl cord
Shell arm
Lightweight reaction arms for AP, DAP and DECA
Battery pack BP-3
Battery pack BP-5
Battery pack BP-7
Universal arm
Universal type reaction arms for AP, DAP and DECA
Quick battery charger BC-3-G
Quick battery charger BC-4-2
Hex adapter
Spanner ring head-shaped torque wrench, such as SP · RSP for the tester.
REMARK
Cannot be used for the LC3/LC3-G series.
Connecting Cable 378
Connecting Cable 379
Connecting Cable 380
Connecting Cable 382
Connecting Cable 383
REMARK
Cable length 2 m
Connecting Cable 384
REMARK
Cable length 2 m
Connecting Cable 385
REMARK
Cable length 2 m
Connecting Cable 387
Cable for connecting Pokayoke (error-proofing) R-CM receiver or SB-FH2 setting box to a PC.
REMARK
Cable length 1.8 m
Connecting Cable 561
REMARK
Cable length 2 m
Connecting Cable 575
REMARK
Cable length 1.1 m (curly cord)
Connecting Cable 579
REMARK
Cable length 2 m
Connecting Cable 584
REMARK
Cable length 2 m
Connecting Cable 585
REMARK
Cable length 1.5 m (curly cord)
Connecting Cable 586
Communication Cable for the compact Digital Torque Wrench CES/CES-G.
REMARK
Cable length: 2 m
Connecting Cable 587
Communication Cable for the compact Digital Torque Wrench CES/CES-G.
REMARK
Cable length: 2 m
SQUARE DRIVE DIMENSION
FHM-PCV
Protective cover for the wireless Pokayoke (error proofing) FHM torque wrench transmitter.
DIN rail for mounting
DIN rail used to affix the R-CM Wireless Receiver with Interchangeable Modules, the IO-CM Expansion Box, and the high volume buzzer BZ-CM. (DIN rail width: 35mm standard).
Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10
