PRODUCTS

English

Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10

GLOBAL HOME

日本語 English 中文 Deutsch

HOME > Products > Torque Wrench > Click Type Torque Wrench > Pokayoke Torque Wrench > T-FHP

Pokayoke Torque Wrench

T-FHP

Remote Signal Torque Wrenches (transmitter for compact torque wrenches)

Prevents human tightening errors (Pokayoke)

Adjustable types / Preset types

Rotary Slip

Wireless

Wireless Pokayoke (error proofing) transmitter for compact torque wrenches satisfies keen expectations. The T-FHP was integrated with the FH series in March 2024. It lets you switch to new communication mode for longer battery life and greater communication range.

Example of mounted T-FHP: QSPFHP6N4

Example of mounted T-FHP: CSPFHP12N4X8D

Example of mounted T-FHP: QSPCAFHP12N

Example of mounted T-FHP: CSPFHP12N4X8D

Example of mounted T-FHP: CSPFHP3N4X8D

Example of built Pokayoke (error proofing) system

Application

Tightening count control for pokayoke prevention of human tightening errors

Features

The R-FH256 receiver has been upgraded to the R-CM, which is downward compatible.
Up until now, the 0.4 to 15N･m torque range was only for wired MS compact pokayoke (error-proofing) torque wrenches, but the T-FHP makes compact wireless pokayoke torque wrenches possible as well.
When the set torque is reached, a tightened-to-completion signal is transmitted wirelessly. This makes it easy to create a wireless pokayoke system for preventing human tightening errors, and improves workability.
The T-FHP can be mounted on the following torque wrenches: QL2N-MH, QL5N-MH, QL10N, QL10N-MH, QL15N, QL15N-MH, CL2NX8D-MH, CL5NX8D-MH, CL10NX8D, CL10NX8D-MH, CL15NX8D, CL15NX8D-MH, QSP12N4, CSP12N4X8D, QSPCA6N, QSPCA12N, SP2N2, SP8N2 and RSP8N2. Click the “See Availability & Price” button below to view a list of models the T-FHP can be mounted on.
The T-FHP is operable with the same receiver and setting controller that use the FH256MC series of torque wrenches. So you can use it also with the FH256MC series wireless pokayoke (error-proofing) torque wrenches, reducing the cost of adopting the system.
The same receiver and setting controller can be used with the new R-CM receiver and FHM.
Battery life: Approx. 300,000 charges. Wireless transmission distance: Approx. 10 to 20 meters.
The T-FHP conforms to telecommunication standards in Japan, the U.S., the EU, China, Thailand, Malaysia, Taiwan, Mexico, Vietnam, South Korea, and India. (Information valid as of June 2021.) For other countries, please contact Tohnichi.
Except for some products, the T-FHP series is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Specifications

MODEL		T-FHP
FREQUENCY BAND		2.4GHzband (2.402GHz～2.479GHz、1MHz interval 78ch)
COMMUNICATION SYSTEM		Spread spectrum(frequency hopping system)
MODULATION SYSTEM		GFSK
GROUP CHANNEL		256(000～255)
ID		３digit (000～999)、7digit (alphanumeric）
MATERIAL OF CASE		PBT Plastic
POWER		DC3V(CR2032)
DISPLAY		Communication status check LED (RED / BLUE ) Remaining battery (Blue / red alternating flashing 3 times )
OPERATING TEMPERATURE RANGE		0～45℃
TRANSMITTING RECEIVING DISTANCE		about 10～20m


MODEL		QSPFHP6N4	QSPFHP12N4
S.I. RANGE［ N・m］		1～6	2～12
METRIC RANGE［kgf・cm］		10～60	20～120
MAX. HAND FORCE［ N］		45	89
DIMENSION ［mm］	EFFECTIVE LENGTH（L）	135
	OVERALL LENGTH（L’）	185
	SQ. DRIVE（a）	6.35
	SQ. DRIVE（b）	7.5
	HEAD（R）	11.5
	HEAD（h）	17.5
	BODY（m）	19
	BODY（n）	9.2
	BODY（d）	15
	BODY（D）	24
			Accuracy　±3%

MODEL		CSPFHP6N4X8D	CSPFHP12N4X8D
S.I. RANGE［ N・m］		1～6	2～12
METRIC RANGE［kgf・cm］		10～60	20～120
AMERICAN RANGE［lbf・in］		10～50	20～100
MAX. HAND FORCE［ N］		39	79
DIMENSION ［mm］	EFFECTIVE LENGTH（L）	153
	OVERALL LENGTH（L’）	165
	HEAD（d3）	8
	BODY（m）	19
	BODY（n）	9.2
	BODY（d）	15
	BODY（D）	24
			Accuracy　±3%

Notes

Click the “See Availability & Price” button below to view a list of torque wrench models the T-FHP can be mounted on.
Modifications after purchase of an MS-type torque wrench cannot be made.
Reinstallation from a conventional FHS transmitter to the T-FHP transmitter cannot be performed.
One R-CM receiver can communicate with a maximum of four torque devices, but it does not function with a mixture of new and old telecommunication modes. (You can use the SB-FH2 setting controller to switch FHM and CSPFHW to the older telecommunication mode.)
T-FHP series SI unit products (except mountable products QL2N-MH, QL5N-MH, CL2NX8D-MH, CL5NX8D-MH, and SP2N2) and metric unit models (except mountable products 20QL-MH, 50QL-MH, 20CL-MH, 50CL-MH, and SP2N2) are compliant with ISO 6789:2017 standards starting January 2022. Calibration Certificates will be different from older products. American unit products are not compliant with ISO 6789:2017.

Dimensions

Expand dimensions

CSPFHP

QSPFHP

◆ How to order

Specify Tohnichi, model name and torque value.

Example 1: Tohnichi QSPFHS6NX Torque Free

Example 2: Tohnichi QSPCAFHP12NX 8N•m + R-FHSET-AC + SB-FH2 + IO-CM

* R-FHSET-AC is a set composed of the wireless module for FHM/FH, the R-CM receiver, and the BA-8R (AC adaptor).

◆ Things to remember when ordering

Modifications after purchase of an MS-type torque wrench cannot be made.
Reinstallation from a conventional FHS transmitter to the T-FHP transmitter cannot be performed.
Click the “See Availability & Price” button below to view a list of torque wrench models the T-FHP can be mounted on.