MarkPRODUCTS

English

Use accurate torque controls to improve quality! Case examples can be found in torque handbook 8

Pokayoke torque wrenchNEW

QSPCAFHP/QSPCAFHLSM

Rotary Slip Wireless Pokayoke Torque Wrench
IEC markRoHS markingSocket insertion part□6.35Socket insertion part□9.53Socket insertion part□12.7

Prevents human tightening errors (Pokayoke)

Preset

Rotary Slip

Wireless

A torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors.

QSPCAFHLSM70N

Example of a Pokayoke (error-proofing) configuration:

R-CM receiver (shown connected to M-FH radio module and AC adaptor BA-8R)

Application

  • Pokayoke system to prevent under-tightening, over-tightening and missed tightening

Features

  • The QSPCAFH has been upgraded to the QSPCAFHLSM model.
  • When set torque is reached, rotary slip occurs and a tightened-to-completion radio signal is transmitted. The system is cordless, greatly increasing workability.
  • [New Telecommunication Mode] The QSPCAFHLSM can monitor transmitter battery voltage. Distance has been extended to around 20–30 meters.
  • One R-CM receiver can check the IDs of up to four torque wrenches. When connected to the CNA-4mk3 Count Checker (Poka Patrol), it is easy to build a Pokayoke (error proofing) system.
  • The QSPCAFHLSM can be switched to the older telecommunication mode using the SB-FH2 setting controller (sold separately). Then the older R-FH256 can be used.
  • QSPCAFHP/QSPCAFHLSM conform to the IEC 61340-5-1:2007 Standard (protection of electronic devices from electrostatic phenomena).
  • The QSPCAFHP/QSPCAFHLSM series are compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Specifications

MODEL QSPCAFHP6N QSPCAFHP12N QSPCAFHLSM30N QSPCAFHLSM70N                                  
S.I. TORQUE RANGE[N・m] MIN.~MAX. 2~6 4~12 10~30 20~70                                  
METRIC TORQUE RANGE[kgf・cm] MIN.~MAX. 20~60 40~120 100~300 200~700                                  
AMERICAN TORQUE RANGE[lbf・in] MIN.~MAX. 20~50 40~100 90~270 180~620                                  
DIMENSION[mm] OVERALL LENGTH L 197 267 346                                  
SQ. DRIVE a 6.35 9.53                                  
HEAD R 14 17 21.5                                  
HEIGHT h 37 48 58                                  
BODY e 34 40.5 49                                  
W 44.3 51 57.5                                  
φd 15 20 27.2                                  
φD 24 34 -                                  
WEIGHT[kg] 0.33 0.64 1.24                                  
ACCURACY[% ] ±6 ±4                                  
                                                   
                                                   
MODEL QSPCAFHLSM QSPCAFHP                                      
FREQUENCY BAND 2.4GHzband (2.402GHz~2.479GHz、1MHz interval 78ch)                                      
COMMUNICATION SYSTEM Spread spectrum(frequency hopping system)                                      
MODULATION SYSTEM GFSK                                      
MODULATION RATE 250kbps/1Mbps 1Mbps                                      
GROUP CHANNEL 256(000~255)                                      
ID 3digit (000~999)、7digit (alphanumeric)                                      
POWER DC3V(CR2032)                                      
ANTENNA pattern antenna                                      
OPERATING TEMPERATURE RANGE 0~50℃ 85%RH or less (No condensation)                                      
TRANSMITTING RECEIVING DISTANCE QSPCAFHLSM ( New communication method):about 20~30m
QSPCAFHLSM ( Old communication method):about 10~20m
QSPCAFHP :about 10~20m
                                     
                                     
                                     
                                                   
Notes
  • The older QSPCAFHP and QSPCAFH use the former telecommunication mode. They can use the older R-FH256 receiver and the downwardly compatible R-CM.

    • For further information, please consult the R-CM receiver catalog.

  • The QSPCAFHP conforms to wireless technical standards in Japan, the U.S., the EU, China, Thailand, Malaysia, Taiwan, Mexico, Vietnam, and South Korea. (Information valid as of June 2021.)

  • As of December 2021, the QSPCAFHLSM conforms to wireless technical standards in Japan (TELEC), the U.S. (FCC), Canada (IC), the EU (CE), Thailand (NTC), India (WPC), and Singapore (IMDA). It can also be used in China, Mexico, and Vietnam.

  • One R-CM receiver can communicate with a maximum of four torque devices, but it does not function with a mixture of new and old communication modes. (You can use the SB-FH2 setting controller to switch the QSPCAFHLSM and CSPFHW to the older communication mode.)

  • Products are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products.

 

Standard accessory
  • Provided with one Panasonic CR2032 button lithium battery (for testing)

 

Dimensions

QSPCAFHP6N-QSPCAFHP12N

QSPCAFHLSM30N

QSPCAFHLSM70N

◆ How to order

[Example 1] Tohnichi QSPCAFH12NX15DXT Free

[Example 2] Tohnichi QSPCAFHLSM30NXT Free + R-FHSET-AC

* R-FHSET-AC is a set composed of the wireless module for FHM/FH, the R-CM receiver, and the BA-8R (AC adaptor).

[Example 3] Tohnichi QSPCAFHLSM70NXT = 50Nm + R-FHSET-AC

* The R-FHSET is a set composed of the wireless module for FHM/FH, and the R-CM receiver.

◆ Things to remember when ordering
  • QSPCAFHP/QSPCAFHLSM are pre-set, so torque cannot be set without a tester.

 When ordering, please specify the torque values you intend to apply.

  • Some models other than QSPCAFHP/QSPCAFHLSM can also be equipped with a transmitter. Please contact us for details.

  • The group channel and ID are initially set when you place the order. To change them, the SB-FH2 setting controller (sold separately) is required.

 

Download

Product Catalog

Japanese English Chinese German

You must be a registered member to download the following files.

Registration
Manuals

Japanese English Chinese German

Software

Japanese English Chinese German

2D CAD (DXF)

Japanese English Chinese German

3D CAD (IGES)

Japanese English Chinese German

Parts List

Japanese English Chinese German

Online Part Search System
How to Use
Features of TOHNICHI Torque Wrench

Japanese English Chinese German

How to set torque

Japanese English Chinese German

[August 2022 Version] Tohnichi’s Torque Engineering Seminars yield positive results in the workplace right away.

Japanese English Chinese German

Differences between adjustable, preset and pre-lock torque wrenches

Japanese English Chinese German

Technical Data
3. Inspecting the Tightening Torque

Japanese English Chinese German

4. Tightening Reliability

Japanese English Chinese German

5. Selection of Tightening Tools

Japanese English Chinese German

6. Torque Tools are Measurement Equipment

Japanese English Chinese German

[August 2022 Version] Everything from torque controls to Tohnichi’s Tightening Guarantee System

Japanese English Chinese German

Torque Wrench Management and Loss Fees

Japanese English Chinese German

Initiatives for ISO 6789:2017

Japanese English Chinese German

Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink