MarkPRODUCTS

English

Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10

Torque MeterNEW

TME3-G

Digital Torque Meter

Digital

Direct Reading

Pole Clamping

Ideal for measuring bottle cap opening torque. The torque meter TME2 series has been updated to the TME3-G series.

Can detect primary peak opening torque (when cap begins turning) and secondary peak (when bridges break). The drop width required for peak detection can be set to prevent mistaken detection of the unstable region.

Pole shape has been refined to permit a minimum chuck diameter of 7 mm.

Pole anchors use a corotation prevention mechanism to grasp your work firmly.

Icons for operation module and situation display make operation intuitive.

For wired handling of measurement data, download (no charge) Data Receiver DtRcv, which can save to Excel® and CSV files, or application software for TME3 (APS for TME3), which can measure torque waveforms and be used for changing various settings. (Cannot be used for wireless operations.)

Application

  • Bottle cap opening torque measurement.
  • Cosmetic container torque measurement.
  • Torque measurement of GL standard screws used for medicine containers.
  • Electronic component rotary torque measurement.
  • Working torque testing.
  • Torsional torque measurement and strength testing.

Features

  • TME-G can detect primary peak opening cap torque and secondary peak torque.
  • The clamp moves the four poles, sliding them to hold your work firmly.
  • Pole shape has been refined to permit a minimum chuck diameter of 7 mm. Pole anchors use a corotation prevention mechanism to grasp your work firmly.
  • Icons for operation module and situation display make operation intuitive.
  • For wired handling of measurement data, download (no charge) Data Receiver DtRcv, which can save to Excel® and CSV files, or application software for TME3 (APS for TME3), which can measure torque waveforms and be used for changing various settings. (Cannot be used for wireless operations.) *Cable No. 586 or No. 587 (sold separately) is required to connect TME3 to your computer.
  • Accuracy ± 0.3% FS + 1 digit
  • With CE marking

Specifications

MODEL TME20CN3-G TME200CN3-G TME500CN3-G TME1000CN3-G TME2000CN3-G
TORQUE RANGE
[cN・m]
MIN. - MAX. 2 - 20 20 - 200 50 - 500 100 - 1000 200 - 2000
1 DIGIT 0.02 0.2 0.5 1 2
TORQUE RANGE
[N・m]
MIN. - MAX. 0.2 - 2 0.5 - 5 1 - 10 2 - 20
1 DIGIT 0.002 0.005 0.01 0.02
TORQUE RANGE
[gf・cm]
MIN. - MAX. 200 - 2000
1 DIGIT 2
TORQUE RANGE
[kgf・cm]
MIN. - MAX. 0.2 - 2 2 - 20 5 - 50 10 - 100 20 - 200
1 DIGIT 0.002 0.02 0.05 0.1 0.2
TORQUE RANGE
[ozf・in]
MIN. - MAX. 2.8 - 28 28 - 280 70 - 700 140 - 1400 280 - 2800
1 DIGIT 0.02 0.2 0.5 1 2
TORQUE RANGE
[lbf・in]
MIN. - MAX. 0.17 - 1.7 1.7 - 17 4.4 - 44 8.8 - 88 17.5 - 175
1 DIGIT 0.002 0.02 0.05 0.1 0.2
DIMENSIONS
[mm]
OVERALL LENGTH 273.5
WIDTH 217
HEIGHT 116.5
CHUCKABLE DIAMETER φ 7 - 190
WEIGHT [kg] 3.5
Accuracy ±0.3%F.S. + 1digit
             
Common Specifications            
DISPLAY Black mask LCD ( white-red-blue )
DATA MEMORY 1000 data
STATISTICAL PROCESSING Number of samples / max. / min. / mean value / dispersion width / standard deviation
MEASURING MODE PEAK / RUN / DOUBLE PEAK
DATA OUTPUT Serial communication compatible with USB connector
RESET Manual / Auto ( 0.5-5.0 sec. freely changeable )
CONTINUOUS DATA OUTPUT INTERVALS Approx. every 20ms ( Waveform capture interval for application software )
POWER AC100 - 240V ± 10%
POWER CONSUMPTION Less than 5W
OPERATING TEMPERATURE 0 - 40℃( no condensation )
MEASURABLE MASS Less than 5kg
Notes
  • The supplied USB cable (No. 587) connects to power source. For wired data communication, please place a separate order for either No. 587 (TME3 side: Type-C/computer side: Type-A) or No. 586 (TME3 side: Type-C/computer side: Type-C).

  • Excel is either a registered trademark or a trademark of Microsoft Corporation in the United States and other countries.

 

Standard accessory
  • AC Adapter (BA-7)

  • USB Cable (No. 587)

  • Support Plate (standard accessory only for TME1000CN3-G and TME2000CN3-G)

 

Dimensions

◆ How to order

[Tohnichi] [Model] Please specify.

 

[Example] Tohnichi TME200CN3-G

Optional Equipment

TM

5TM

Testers, checkers, calibration kits

Download

Product Catalog

Japanese English Chinese German

You must be a registered member to download the following files.

Registration
Manuals

Japanese English Chinese German

Software

Japanese English Chinese German

2D CAD (DXF)

Japanese English Chinese German

3D CAD (IGES)

Japanese English Chinese German

Parts List

Japanese English Chinese German

Online Part Search System
Technical Data
6. Torque Tools are Measurement Equipment

Japanese English Chinese German

Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink