PTA-BT/PTA-G-BT

Application

• Labor-saving for tightening tasks from 2 to 10 N·m. * Two models in the series.
• Automatic retrieval of tightening torque data reduces task load and prevents entry errors.
• Detects two rounds of tightening to prevent this human error (Pokayoke).
• Detects torque increase in insufficient rotation angles caused by “biting (seizure)” or the like during tightening.
• Terminal block tightening operations. Terminal block screws: M5/M6 (PTA5N-BT) or M6/M8 (PTA10N-BT) * For tightening torque values, check the spec. sheet etc. provided by the terminal block manufacturer.

Features

• Just pull the trigger of the PTA-BT/PTA-G-BT for fully automatic tightening.
• Comes with built-in torque sensor and angle sensor. Torque precision: ±5%. Angle precision: ±5°
• Measures torque and angle values to determine PASS or FAIL. Can detect tightening abnormalities such as thread fouling and internal thread defects, and can also detect double tightening (Pokayoke (error-proofing)).
• Tightening torque upper and lower limits and angle can be set using the key-in function on the body, or through Bluetooth® connectivity. *Download setting software from “Download” at the bottom of the screen, then > “Software.”
• Purchase this at a low cost and already start using it. Why opt for a high-priced dedicated controller?
• Can transmit tightening data via Bluetooth® technology. * Use Excel® on your computer to manage data received via the DtRcv (Data Receiver). DtRcv is included in software under the screen.
• The torque wrench tester makes it easy to verify torque.
• Low noise, low vibration, without the pulsating sound or vibrations of an impact wrench. See spec sheet for numerical values.
• CO2 emissions are 97% lower than conventional models (Tohnichi pneumatic AUR series).
• PTA-BT/PTA-G-BT conforms to wireless technical standards in Japan, the Thailand, Malaysia, Indonesia, India, and China. (Information valid as of July 2021.) However, certain restrictions apply regarding export procedures to Indonesia, so please check with Tohnichi for more information.
• [Free Gift] Customers who purchase PTA-BT will receive the PTA-BT tightening control software used in the video below from 2:14 to 3:16. [Software Overview] Switchable between Japanese/English, PC sends tightening conditions to the tool, and after tightening, the results are sent from the tool to the PC. Up to nine different tightening conditions can be registered for one work (up to two different types of work). The software displays a picture of the customer's work, allowing the user to visually check the work order, etc. Up to two types of tools can also be registered, so models with different torque ranges and tools with different sockets are also supported. Imported tightening data can be exported in CSV format. *This software cannot be downloaded.
• We can also manufacture PTA-BTL, which, like the CEM3-BTLA series, supports automatic data input to Excel, and which supports the HOGP interface that is linkable to an on-the-market digital ledger system. Please contact us for further details.

Demonstration video

Tohnichi production information: PTA-BT battery-operated fully automatic torque driver