PRODUCTS

English

Pokayoke torque wrench

CSPLD

Wired data transfer preset torque wrench

Tightening Torque Data Management

Preset

Interchangeable Head

Judgment

Light indicator/buzzer

QH15D interchangeable head (sold separately) shown on the CSPLD100N3×15D model

When tightening torque pass/fail decision is OK.

When tightening torque Pass/Fail judgment is NG (No Good)

Configuration example: Tightening data management system using CSPLD torque wrench

Tightening torque data management
Collects tightening torque data in work environments where an FD/FDD type of wireless torque wrench cannot be used.

CSPLD wired data transfer preset torque wrenches display tightening torque Pass/Fail judgments on the body’s LED display for easy, close-at-hand confirmation.
The LED lamp indicates the tool to be used, letting the worker select the appropriate tool without hesitation. (* Separate management software is required to display this. Contact Tohnichi for more information.)
Considerably more compact: Transmitter case size is only about 60% that on the older CSPD series.
The curly design of the cord from the transmitter case improves workability, and places less load on the fixed end of the cord to inhibit fraying.
The CSPLD series is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

CSPLD Wired Data Transfer Preset Torque Wrench

If you need a calibration certificate, please specify the set torque. Tohnichi will issue a calibration certificate whether you purchase the CSPLD separately or purchase it together with the CD5 compact display.
The calibration certificate specifies the CSPLD operating torque, not the display torque.
The digital display must be calibrated against the operating torque. See the manual for instructions.
The new CD5 version is the 1.4, launched in January 2018. When connected to a CSPLD torque wrench, its LED lamps show Pass/Fail judgments.
For the CD5 version 1.3 and earlier, an AC adaptor (sold separately) is required for LED lamp Pass/Fail indications when connected to a CSPLD torque wrench. Contact Tohnichi for more information.
Products are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products.

Connector cable length: 3m

CSPLD

Connecting cable CSPLD

Note: For interchangeable head insert dimensions, click here.

This product is manufactured after the order is placed.

When ordering, please specify the body type and the set torque value.

[Example 1] CSPLD50N3×12D × T30N•m + QH15D + CD5

For more detailed information regarding these points, please contact us.

If you need a calibration certificate, please specify the set torque. Tohnichi will issue a calibration certificate whether you purchase the CSPLD separately or purchase it together with the CD5 compact display.
The calibration certificate specifies the CSPLD operating torque, not the display torque.
The new CD5 version is the 1.4, launched in January 2018. When connected to a CSPLD torque wrench, its LED lamps show Pass/Fail judgments.
For the CD5 version 1.3 and earlier, an AC adaptor (sold separately) is required for LED lamp Pass/Fail indications when connected to a CSPLD torque wrench. Contact Tohnichi for more information.