PRODUCTS
English
Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10
GLOBAL HOMEProduct Search
Enter bolt size, torque and width across flats to perform a product search.
After entering information in each field, press the "Search product" button. You can also search without entering the information.
Torque Gauge
ATGE/ATGE-G
Inspections
Digital
3-jaw Chuck
Direct Reading
Battery
Digital torque gauge series for small torque range 0.1～20cN・m (1～200mN・m) total 6 models.
Torque Gauge
BTGE/BTGE-G
Digital
3-jaw Chuck
Direct Reading
Battery
Digital torque gauge series for small torque range 2～200cN・m.
Torque Wrench Checker
LC3/LC3-G
Checking
Digital
Manual Loading
Direct Reading
Judgment
“Quick check” function now even more advanced. Comes with Pass/Fail Judgment color display, for easy result checking. Routine torque wrench inspections at line-side test stations are now easier and more accurate with Tohnichi’s digital torque wrench checkers in the LC3/LC3-G line checker series.
Pokayoke Torque Wrench
R-CM
Prevents human tightening errors (Pokayoke)
RS232C data input/output
Non-voltage contact output
Wireless
Three different wireless modules can be used, and you can switch them on your own. They can be used on a number of different wireless devices, reducing cost.
Rotary peak torque measuring equipment
ST3-G/ST3-G-BT
Checking
Digital
Rotary Type
Direct Reading
Re-chargeable
ST3 is available in SI units in Japan. ST3-G CPT-G series products are manufactured for the global market and offer a selection of SI, metric and American units of measurement.
![STC200N2-G [Overall length: 230 mm]](/uploads/products/300/pic/300_b1.jpg)
Indicating Torque Screwdriver
STC2-G / STC2-G-BT
Inspections
Digital
Ratchet Head
Direct Reading
Light indicator/buzzer
Re-chargeable
Mounted multi-functional LED ring. Operator can visibly and audibly check the torque status and judgment.
Torque Wrench Tester
TCC2/TCC2-G
Calibration
Digital
Manual Handle
Direct Reading
Tool Management System
With just the one unit, accomplish both torque wrench calibration and data management. Wide range, high precision torque testers.
Torque Sensor
TCF
Voltage Output
Fixed Type
Torque sensor for precise checking of various torque devices. Inspection for torque tools and nut runners.
Torque Sensor
TCR
Voltage Output
Rotary Type
This rotary-type torque sensor lets you make direct measurements when tightening screws and bolts. TCR sales ended in March 2024.
Torque Screwdriver Tester
TDT3/TDT3-G
Calibration
Digital
Manual Rotary
Direct Reading
Loading Device
High-accuracy digital torque screwdriver tester with loading device eliminates measurement errors.
Torque Meter
TME3-G
Digital
Direct Reading
Pole Clamping
Ideal for measuring bottle cap opening torque. The torque meter TME2 series has been updated to the TME3-G series.
Test Piece/Drill Chuck/Table Chuck and Attachment
TP/DTF/TTF+ATF
Auxiliary
Disc spring (TP) / 3-jaw chuck (DTF) / Paul Clamp (TTF + ATF)
3-jaw Chuck
Attachments to help achieve precise torque measurement.
Tightening data management system
TPC/TPC2
Assembly/Inspection
The protocol converter connects Tohnichi products to systems that have other configured protocols
Tension Meter
TT3000
Digital
Direct Reading
High resolution. Greatly enhanced basic functionality. The TT3000 ultrasonic tension meter enables non-destructive visualization of time-dependent changes in bolt tension.
Tension Meter
TT2000
Digital
Direct Reading
Ultrasonic tension meter also supports non-destructive tests to determine bolt axial tension changes that may occur over time. Please note that the TT2000 series has been discontinued.
Tightening data control system for manual tools
TDMS/TDMSHT TDMS-C/TDMSHT-C TDMS-E/TDMSHT-E
Tightening Torque Data Management
CD-ROM/USB memory
Wireless
Re-chargeable
Package software that helps standard values management and early error detection.
Torque Wrench Tester
TF
Calibration
Digital
Electric Power
Direct Reading
Fully Automatic
Central torque management system. Automatic measurement, automatic judgment, etc.
Printer
EPP16M3
Auxiliary
RS232C data input/output
Measurement data is neatly printed.
Setting tools
SB-FH2
Assembly/Inspection
RS232C data input/output
It is easy to wirelessly perform data transfer settings on Pokayoke (error proofing) transmitters and receivers.
Torque Meter
TME2
Digital
Direct Reading
Pole Clamping
The digital torque meter makes data processing easy. The TME2 series has been discontinued and replaced with TME3 series models.
Infrared data receiver
R-DT999
Assembly
Infrared data input / RS232C output
RS232C
Data tank to receive infrared data and output to PC or printer.
Torque Wrench Tester
DOT(E3)-MD/DOT(E3-G)-MD
Electric Power
Direct Reading
Torque wrench tester with motor drive. Tohnichi stopped accepting orders for the DOTE3-MD and DOTE3-G-MD models on November 20, 2017. They were replaced by the DOTE4-MD2 and DOTE4-G-MD2 models, which can now be ordered. DOT-MD was discontinued in July 2021.
Semi-automatic Airtork
HA/HAC/HACQSPDY
Assembly
Pre-Lock
Electric Power
Torque Graduation
Wireless
Re-chargeable
For battery-charge type for excellent workability. Semi-automatic electric torque wrenches let you use your existing torque wrench tester for calibrating.
Battery pack
BP-100-4
Auxiliary
Re-chargeable
Permits continuous use for about 24 hours. The battery pack permits use of a Tohnichi digital torque device in locations out of reach of an AC power outlet. The BP-100-4 was discontinued in September 2019.
Battery pack
BP-100-3
Auxiliary
Re-chargeable
The BP-100-4 battery pack is an upgraded version (upgraded on July 21, 2016) of the BP-100-3. Both versions let you power Tohnichi digital torque tools in places out of reach of an AC power outlet.
![CEM100N3X15D [Overall length 384 mm]](/uploads/products/52/pic/52_b1.jpg)
Digital Torque Wrench
CEM3/CEM3-G
Inspections
Digital
Interchangeable Head
Direct Reading
Judgment
Re-chargeable
Eye-friendly dual display (LCD and LED).
DIGITAL TORQUE WRENCH
CES/CES-G
Assembly/Inspection
Digital
Interchangeable Head
Direct Reading
Judgment
Re-chargeable
Torque measurement range: 0.5 ~ 10 N･m (*) Tohnichi’s smallest digital torque wrench (*two models in the series). The optional Bluetooth module makes it easy to manage data on a computer or other device.
![CTB100N2X15D-G [L'=384 mm]](/uploads/products/220/pic/220_b1.png)
Digital Torque Wrench
CTB2/CTB2-G
Inspections
Digital
Interchangeable Head
Direct Reading
Light indicator/buzzer
Re-chargeable
Detects the original tightened torque applied on the bolt by re-tightening inspection.
Digital Torque Wrench
CEM3-P
Inspections
Digital
Interchangeable Head
Direct Reading
Re-chargeable
Quality inspection torque wrench with data management software that links work name with test results.
![CPT20X10D [Overall length 280.5 mm] + TQH10D (not included with models without -SET)](/uploads/products/213/pic/213_b1.png)
Digital Torque Wrench
CPT/CPT-G
Assembly/Inspection
Digital
Interchangeable Head
Direct Reading
Light indicator/buzzer
Equipped with high brightness LED, which allows easy tracking of the tightening condition.
Pokayoke Torque Wrench
CSPLD
Tightening Torque Data Management
Preset
Interchangeable Head
Judgment
Light indicator/buzzer
Tightening torque data captured when the wrench clicks at the set torque is transferred by cable. The Pass/Fail judgment is displayed on the body’s LED display for handy confirmation.
Wireless Data Transfer Torque Wrench
CEM3-G-BTS/CEM3-G-BTD
Inspection Data Management
Digital
Interchangeable Head
Direct Reading
Wireless
Re-chargeable
Digital torque wrench with collected data wireless transfer function.
![CEM100N3X15D-G-WF [overall length: approx. 384mm]](/uploads/products/281/pic/281_b1.png)
Wireless Data Transfer Torque Wrench
CEM3-WF/CEM3-G-WF
Assembly/Inspection
Digital
Interchangeable Head
Direct Reading
Wireless
Re-chargeable
Digital torque wrench with wireless LAN communication functionality that conforms to the IEEE 802.11 standard. Use it to transmit data wirelessly in a wide variety of work areas.
Wireless Data Transfer Torque Wrench
FD/FDD
Tightening Torque Data Management
Preset
Interchangeable Head
Judgment
Wireless
Transmits tightening torque data wirelessly at the click moment. Pass/fail judgment is known close at hand, providing excellent workability. The FDD’s double tightening detection ensures even greater on-the-job reliability. The R-FHD receiver has been upgraded to the R-CM.
Wireless Data Transfer Torque Wrench
FDD-AD
Tightening Torque Data Management
Preset
Judgment
Wireless
Tightening torque and angle data are transmitted automatically at the audible “Click!” moment. Precision Pass/Fail judgments ensure a higher level of tightening reliability.
Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10
