PRODUCTS

English

Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10

GLOBAL HOME

日本語 English 中文 Deutsch

HOME > Products > Torque Wrench > Click Type Torque Wrench > Angle Wrench > WQL

Angle Wrench

WQL

Click Type Torque Wrench / Assembly

Dial Indicating

Ratchet Head

Torque Graduation

Angle Direct Reading

Angle method torque wrench with management software.

WQL50N

Application

For angle-controlled bolt tightening.

Features

Applicable in angle-controlled bolt tightening in small lot production, maintenance and after-sales service, or back up for angle-tightening nut runners.
Snug torque can be easily set on the torque wrench by scale.
Angle pointer can be set either to the target angle first and load down to zero, or set to zero first, and load up to the target angle.
The angle pointer does not activate until the torque value reaches the snug torque.
Clip shape makes it easy to stabilize needle. A magnet version (MB-PB) is also available as optional accessory for the standard clip.
WQL model can be also used as a standard torque wrench.
The WQL series is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Specifications

Torque Accuracy ±3%
S.I. MODEL			WQL50N	WQL100N4	WQL200N4	WQL280N	WQL420N
RANGE [N・m]	MIN.～MAX.		(5)10～50	(10)20～100	(30)40～200	(30)40～280	(40)60～420
	GRAD.		0.5	1	2
METRIC MODEL			450WQL3	900WQL4	1800WQL4	2800WQL3	4200WQL2
RANGE［kgf・cm/kgf・m］	MIN.～MAX.		kgf・cm (50)100～500	(100)200～1000	(300)400～2000	kgf・m (3)4～28	(4)6～42
AMERICAN MODEL			450WQL3-A	900WQL4-A	1800WQL4-A	2800WQL3-A	4200WQL2-A
RANGE［lbf・in/lbf・ft］	MIN.～MAX.		lbf・in 100～400	lbf・ft 15～75	30～150	30～200	60～300
ANGLE SCALE	ANGLE GRAD.		2°
	MAX.		360°
DIMENSION ［mm］	EFFECTIVE LENGTH	L	180	255	400	600	900
	OVERALL LENGTH	L'	275	349.7	502.5	703	1000.5
	SQ. DRIVE	a	9.53	12.7		19.05
		b	11	15.4		20.5
	HEAD	h	25.1	31.4	37.4	43.5	45.5
		t	35
		A	60.1	66	72	78.5	80
	BODY	m	25.5	28	35		38.6
		n	11.2	12.2	15		16.1
		d	20	21.7	27.2		30
		D	38.5	40	51.5		50

Notes

The torque scale values in ( ) indicate lowest possible set snug torque values. However, accuracy of snug torque below minimum capacity is not guaranteed.

SI unit products and metric unit products in the WQL series are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products. American unit products are not compliant with ISO 6789:2017.