PRODUCTS

English

Use accurate torque controls to improve quality! Case examples can be found in torque handbook 10

GLOBAL HOME

日本語 English 中文 Deutsch

HOME > Products > Torque Wrench > Click Type Torque Wrench > Adjustable Torque Wrench > YCL2

Click Type Torque Wrench

YCL2

Interchangeable Head Type Torque Wrench Designed to Prevent Over-torque

Assembly

Adjustable

Interchangeable Head

Graduation

2-step motion

Prevents over-torque while tightening.

YCL90N2X15D [Overall length 414 mm]

When the set torque is reached, the toggle will activate with a clicking sound and torque will decrease about 5 degrees.

There is no problem if tightening is completed by the first click.

Even if you tighten further, the torque will increase without exceeding the set torque and a second click will sound.

Tightening may be completed only to a moderate degree because, as the illustration shows, you can toggle up to 19 degrees (5 degrees + approx. 14 degrees) from the first click without exceeding the set torque.

Application

Suitable for assembly of critical parts.

Features

The Two-Step Motion system (primary click and secondary click) prevents over-torque during tightening.
When set torque is achieved, the toggle activates, and after about 5°, if you continue tightening rotary slip will occur at about 14°.
Interchangeable head torque wrench. With just this one wrench, changing heads lets you use it as a wrench, ring spanner, ratchet, hex head and more. Without the need for so many different devices, this torque wrench saves you money.
Torque setting is easy to adjust by knob and scale.
YCL10N2X10D, YCL20N2X10D, YCL40N2X12D, YCL70N2X12D, YCL90N2X15D and YCL140N2X15D can be used with AH adjustable open end interchangeable heads.
The YCL2 series is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Specifications

Accuracy ±3%
S.I. MODEL			YCL10N2X10D	YCL20N2X10D	YCL40N2X12D	YCL70N2X12D	YCL90N2X15D	-	YCL140N2X15D	YCL180N2X22D	-
TORQUE RANGE [N・m]	MIN. ～ MAX.		5～10	10～20	20～40	35～70	45～90	-	70～140	90～180	-
	GRAD.		0.1	0.2	0.25	0.5	0.25	-	0.5		-
METRIC MODEL			100YCL2	200YCL2	400YCL2	700YCL2	900YCL2	-	1400YCL2	1800YCL2	-
TORQUE RANGE［kgf・cm］	MIN. ～ MAX.		50～100	100～200	200～400	350～700	450～900	-	700～1400	900～1800	-
	GRAD.		1	2	2.5	5	2.5	-	5		-
AMERICAN MODEL			YCL100I	YCL200I	YCL400I	YCL600I	YCL750I	YCL1000I	YCL100F	-	YCL150F
TORQUE RANGE［lbf・ in/lbf・ft］	MIN. ～ MAX.		lbf·in 50～100	100～200	200～400	300～600	400～750	600～1000	lbf·ft 45～100	-	80～150
	GRAD.		lbf·in 1	2	2.5	5	2.5	5	lbf·ft0.5	-	0.5
APPLICABLE BOLT	COMMON STEEL		(M7)	M8	M10	M12	M12(M14)		M16	(M18)
	HIGH TENSION		M5, M6	(M7)	M8	M10			M12	(M14)
MAX. HAND FORCE [N]			46.6	93.1	146	255	237		369	311
DIMENSION [mm]	EFFECTIVE LENGTH	L	215		275		380			579
	OVERALL LENGTH	L'	245		309		414			607
	HEAD	d3	10		12		15			19
	BODY	m	25		27.1		34.1			37.9
		n	12		14.2		17.4			17.9
		d	20		21.7		27.2			30
		D	36		37		46.5			50
WEIGHT [kg]			0.35		0.53		1.05			1.75

Notes

Overall length does not include interchangeable head. PH (Pipe wrench head) type interchangeable head is not available for this model.

SI unit products and metric unit products in the YCL2 series are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products. American unit products are not compliant with ISO 6789:2017.